hours:
8-5 est monday through thursday from april till october
pickups must be made by appointment
truck freight pickups between the hours of 12pm and 5pm on scheduled days only
We now accept credit cards! Visa, MasterCard and Discover may now be used for payments!
deluxe base oven and powder booth package
priced at $4350.00 for the package
Deluxe base oven
-
outside dimensions 52" wide 53" deep 84"high
-
inside dimensions 40-1/2" wide 44" deep 72" high
-
sheeted inside and outside with galvanized sheet metal
-
metal frame member every 12" or 16" based on position of frame
-
jig welded frame , frames are not screwed or bolted together like others
-
walls, top and bottom are 3-3/4 thick and insulated with fiberglass insulation
-
mounted on castors for ease of pushing around your shop
-
cam lock latches allow for quick "in and out"
-
unit draws 40 amps of power
-
requires 220v single phase 3 wire for hook up
-
circulation fan helps to remove hot spots inside oven
-
equipped with a digital P.I.D temperature controller with inside temp reading and set points
-
wiring is ran to each heater separate to allow easy troubleshooting if a problem arises
-
3 expanded metal shelves allow you to sit parts inside , shelves are removable
-
trolley on the ceiling allows you to roll parts into the oven via a over head trolley system
-
6x6 window mounted in center of the door allows you to look inside oven to watch for "flow out"
-
inside light assembly helps to view parts inside
open face dust collection booth
non reclaimable
Our open face dust collection booths are the perfect addition for the average do it yourselfer looking for an economical way to collect over spray from powder coating operations.
unit specs:
-
outside dimensions 5' wide 50-1/2" deep and 8'8'' high
-
inside working area is 56"wide 44" deep 7' high
-
hanger bar in ceiling to let you hang parts
-
they feature 110v operation
-
1 dust proof fluorescent light assembly
-
removable dust filters on back wall
-
high micron bag filter on top of unit
-
external fan motor from collection unit
-
110v plug outlet and light switch
Our units are shipped unassembled and require assembly. Assembly of the unit should take less than 2 hours, all you need to do is bolt it together, you don't even need to wire anything. The plug outlet is pre-wired and all you need to do is put it on the side of the unit and bolt it down.
The top of the dust collection unit has 6 bag filters to allow you to vent the unit right back into your shop. The filters on the back wall let you get the majority of the dust without always needing to replace the bag filter assembly.
